The back is left rounded so the Whiskey Barrel Round Vanity is free standing and is NOT flush against the wall on the back.

The back or bottom will need to be drilled or have a hole cut for your plumbing before installation.

The girth at the widest point is approximately 24-25 inches wide. Measures 34-35 inches high. Dimensions are approx. because not every barrel is exactly the same size. 

SHIPS FREE TO THE LOWER 48 states. 
This product will take 2-3 weeks to ship. 

These vanities are made from Grade A barrels. Please note that these are made from Oak, and this wood will shrink and expand within the metal bands based on weather and humidity. This will not impact the integrity of the Whiskey Barrel Round Vanity, but you may notice that when the wood shrinks in colder and drier weather, you will notice gaps. This is normal and is part of the rustic look of the item. The wood is dry but may continue to dry over time, which will also cause some shrinking between the staves of the barrel. 

The sink and faucet are included and the holes are cut for them, however they are dry fitted but not installed because of shipping and on site plumbing purposes. 

The sink is a high quality copper sink with a copper drain included. 
The faucet is a rustic bronze pump style faucet. 

There is an door with hinges as shown. This interior of the barrel is black charred, and has remnants of aging whiskey which has an aroma. This area is for plumbing and storage in the interior is not recommended unless a separate container is placed inside. 

The back of the barrel will need to be cut/drilled out so plumbing can be hooked up from the wall of your room.